How do you get Hard Water Build up off Faucets?

*This post may contain affiliate links which implies that I may receive commission if you purchase through the links that I have provided (this happens at no extra cost to you). Here is my full affiliate disclosure.

How do you get hard water build up off faucetsDo you own the best faucets for hard water? How do you get hard water build up off faucets? Do your faucets look scummy, stained, or cloudy? Chances are the culprit is the tap water that you are using. You will realize that you might be using hard water in your home.

This kind of water usually carries dissolved minerals such as the calcium and magnesium through the home plumbing. As the water evaporates, it usually leaves a build-up on the faucets of your home.

If this build-up is not removed over time, it can be detrimental. Sometimes, it can accumulate and become hard, scaly deposits. Therefore, there is a need to get this build-up off your faucets as soon as possible.

The good news is that this article will outline how you can get rid of these deposits off your faucets. You should consider the following ideas today:

1. Get your cleaner ready

There are many cleaners that can help you remove hard water mineral deposits off your faucets. Some of these include acidic liquids.

They have proved to be very effective in batting these mineral deposits in the past. The good news is that acid basically eats away calcium and other mineral deposits that might be present on your faucets.

Some of the acidic household cleaners that you should consider include:

  • White vinegar
  • Lemon juice
  • CLR cleaner
  • Phosphoric acid cleaners
  • Muriatic acid
  • Sulphuric acid

2. Gather all the materials that you need

Before you start removing the mineral build-up on your tap, you should begin with getting all the materials that you need at hand. Here, for instance, you need to wear gloves.

Since you are dealing with acid cleaners, your hands might be at risk. You also need to get protective eyewear. This will greatly help protect your eyes as you clean your faucet. It is vital that you consider getting a sponge or a toothbrush for this undertaking.

Your toothbrush of choice should not be used again after you are done with this cleaning. Here, you can also get non-abrasive scrubbers or sponges. They are also incredible tools.

Other tools that you need include a towel, pliers, rubber band, and a plastic bag. All these tools should be ready for you to get optimal results.

3. Remove the faucet

Some homeowners usually prefer placing a plastic bag over the faucet that has the hard mineral deposits. However, this is not very ideal as it will only remove the mineral deposits on the outer part of the faucet.

The main aim here should be removing mineral deposits both on the outer and inner parts of the faucet. This will ensure that you get clean water for drinking and using it at your home.

If you want to clean out the inside of your faucet and prevent future clogs, you should remove the faucet first and clean it. When removing the faucet aerator, you should be careful enough not to mess around.

You would not like a situation where you have to replace your faucet since it has broken down or something of the sort. Therefore, you should keep track of the gaskets and other components so that you can reattach everything well afterward.

4. Soak the faucet in the acidic cleaner

Once you have removed the faucet successfully, time is ripe for you to put your protective eyewear and pour your acidic cleaner in a bowl. By wearing this gear, you can be sure that your eyes will be safe. Once you pour your acid cleaner in a bowl, you can then place the fixture into the cleaner.

It is important that you check the directions from the manufacturer that shows how long you should soak the faucet. You would not want your beautiful faucet to corrode in the long run.

To clean the other part of the faucet, consider placing a plastic bag with our acid cleaner of choice and then secure it using a rubber band.

As you do this, remember that some acidic cleaners should not be used on certain surfaces. Therefore, you should pay attention to this when using strong acids such as phosphoric acid, sulphuric acids, and so on.

If you notice that the base of your faucet has some mineral deposits, try soaking an old towel or rag in vinegar and wrap around the affected area. After that, you can leave it for about one hour or two and then scrub off the remaining mineral deposit.

5. Rinse in running water

Having soaked the faucet in an acid cleaner, you should now rise it with clean running water. As you do this, you should try to scrub the surface with a piece of cloth or a toothbrush so that you can eliminate any build-up left.

This will go a long way in ensuring that no acid is left on the faucet in the long run, as they can eat away metals if left unattended for long. Rinse with more water to ensure that your faucet remains as clean as possible.

6. Reconnect the faucet

Once you’re done, you can then reconnect the faucet to their fixtures. You should ensure that the gaskets and other components are all in order. Thereafter, you can start using your tap once again.

It is easy to remove this build-up from your faucets using the ways mentioned above. However, some homeowners hardly remove hard water mineral deposits from their taps.

If you hardly remove these deposits once in a while, these deposits might build up and make your faucet look unattractive. Treating these fixtures kindly regularly can help solve this issue.

Also, getting a water softener can help solve this problem. This is because hard water will be softened before reaching the faucet of your home.

While this might seem costly to some homeowners, it is worth it. This will help keep the mineral build-up on your faucets at bay.

Conclusion

Getting rid of the mineral deposits on your faucet has never gotten easier than this. Consider these ideas today, and your faucet will be sparkling clean. They will be more appealing and can complement the look of either your kitchen or bathroom. Consider these ideas today and you will be a proud homeowner.

How do you get Hard Water Build up off Faucets? was last modified: by

Leave a Comment

5 × 2 =

This site uses Akismet to reduce spam. Learn how your comment data is processed.