Would you like to make your toilet use less water? Is your toilet using too much water per flush? How do I make my toilet use less water? Chances are, you are not the only one facing this issue. Even those with the best flushing toilets, they might be facing the issue.
You will realize that most homeowners are looking for ways to reduce the water used in their toilets in order to save more on the monthly water bills. In any case, the toilet has shown to be one of those places where more water is used daily.
The situation can be worse when the toilet has many users. You will be surprised to realize that the toilet usually accounts for about 30% or more of the home’s water consumption. The good news is that you can reduce the amount used here in several ways. This article will shed light on these ways. These include:
1. Buy a new fill valve or flapper
Sometimes, the flapper or fill valve of your toilet could be having issues. If you allow this problem to persist, you might end up using more water in your toilet.
This can be detrimental in the long run. By getting a new fill valve can actually save about 60 ounces of water per flush.
This is because you will be able to adjust the amount of water that is directed towards your toilet bowl. Annually, you will be surprised to realize that you have saved up to 3000 gallons.
On the same note, having the right flapper in your toilet tank will help you save about 4.4 gallons of water per flush. This is a great way to reduce water consumption in your toilet.
2. Check for leaks
Did you know that your toilet can have leaks unawares? Chances are, you might not think that your toilet might be leaking. However, the reality of issues is that toilets normally leak due to various reasons. It is estimated that a household can lose up to 10,000 gallons of water annually as a result of leakages alone.
To solve this problem, you should put a toilet leak detector dye tablet in your toilet tank. The good news is that this tablet normally contains a harmless dye that might appear green, blue, or purple in color.
If you notice that the color shows in your toilet bowl without flushing, chances are that your toilet is leaking. If you can detect this leakage early enough, you will be able to save up to 500 gallons of water in a day.
3. Reuse the shower water
Have you ever thought of reusing your shower water to flush your toilet? This might seem strange, but it very practical. Once you get to the bathroom, the first thing you do is to undress as you wait for the water to warm.
Chances are that you might tend to flex in the mirror and so on. Did you know that the water running down the drain can be used for flushing your toilet?
You can consider having a separate bucket for collecting this water. Once your shower water is hot, you can remove the bucket and then take a shower.
The next moment you need to flush your toilet, you can remove the cover of the toilet tank and out the collected water and then flush your toilet. This way, you will be able to save more water in your toilet.
4. Consider upgrading your toilet
If you have the traditional toilet in your home, time is ripe for you to upgrade it. Ideally, you should not use the same amount of water to flush urine and human waste. For the urine, a small quantity of water should be used.
However, for human waste, you can consider using more water to flush it. This is the reason why you need to appreciate the idea of having a dual-flush toilet.
You will realize that these toilets have become more mainstream and affordable out there. With these kinds of toilets, you will be able to save about $14 to $20 annually on your water bills.
This means that you will get the value for your money once you install them. They have proved to be very effective for many homes out there.
5. Install a toilet tank bank
Installing a toilet tank bank is not very expensive. In fact, these toilet banks require little to no maintenance. Also, they help prevent odors.
All you need to do is to hang it onto the inside of the toilet and then add water. This will help you save more water per flush. You can expect to save up to 0.8 gallons of water per flush. This is an incredible way to save water in your toilet.
6. Flush less often
Although this method is not meant for everyone, it has proved to work for many homeowners out there. In fact, it comes with no cost and is very easy to implement.
Here, you should only flush your toilet when someone has just relieved himself or herself. In this case, only solid waste should be flushed. For liquid waste, it can sit.
When using the tissue, you should be careful not to clog your toilet unawares. If anything, you can have a plunger handy to unclog your toilet.
However, this method is ideal if you are the only one who uses the toilet. This is because other members of the family might not appreciate the idea at first. The good thing is that you will end up saving more water per flush.
7. Install a toilet fill cycle diverter
This one is normally installed on the end of the tanks fill tube. The good news is that it will you to redirect water that goes to fill up the toilet back into the actual tank. With this method, you will be able to reduce water consumption by up to 0.5 a gallon of water once your toilet.
If you have been using a lot of water in your toilet, you can reduce this amount by implementing the ideas mentioned above. This will help you save more on your water bills. The amount of money saved can be used to remodel your home, and so on. Consider these ideas today, and your toilet will be water efficient.