Are you troubled by the limescale build-up in your toilet bowl? Probably, you are using hard water, which is susceptible to making your toilet bowl appear dirty due to limescale build-up. Sometimes, you can try to scrub and apply different bleach quantities but this might not be working.
If this is the condition that you are facing, it must be very disgusting; the use of bleach is likely to partially bleach the scale but might not be removing it. The presence of different minerals in the water that you use to flush the toilet is responsible for all this.
Today, I would like to teach you a few tricks that you can use to get rid of limescale in the toilet bowl. We will discuss the most effective methods of getting rid of limescale in your toilet bowl below.
Contents
How do you remove the Limescale from the Toilet Bowl?
Requirements
- White vinegar
- Protective gloves
- Toilet brush
- Baking soda
Below is a step-by-step remedy that you can use in your home
- Start by wearing protective gloves for safety reasons.
- Make sure that the water supply to your toilet is turned off; meanwhile, flush the toilet to ensure that the water level is kept to the minimal level.
- Once you flush the toilet, you will enable exposing the limescale, which will make the cleaning process straightforward.
- Any limescale hidden further down can be removed using a plunger. After this, prepare a solution of white vinegar and pour it on the affected zones of your toilet bowl. Otherwise, you can use pure vinegar and allow it to react with the limescale for a period of one hour before you can commence cleaning.
- Use the toilet brush to scrub in the toilet to further remove the limescale. Sometimes, you might not require this step since the limescale at times vanishes without further action once you pour the vinegar solution.
- If you are still able to see some limescale, you need to pour some baking soda on your brush and scrub it further.
- Once this is done, turn on the water supply and rinse the toilet bowl.
But you want your entire toilet to appear clean, which means you are not only cleaning the inside area. This is how to go about it.
- Use undiluted white vinegar and pour it on the sides of the toilet to help remove limescale from the toilet rim. Allow this to sit for about 5 hours without any disturbance.
- Using your toilet brush that has an adequate amount of undiluted white vinegar, scrub the toilet rim; you will achieve this by scrubbing the toilet from the downside. You will need to apply some power and pressure to be able to remove all the limescale.
- When all this is done, flush the toilet to remove vinegar from the bowl and the limescale too.
- Add some toilet cleaner on the rim, allow it to settle, and scrub using the toilet brush. Due to the irritating smell of the cleaner, ensure that your space is well ventilated.
Are you in search of another way of getting rid of limescale on the toilet bowl? Has the limescale on your toilet bowl turned stubborn? Here is the way to handle it.
- Two types of sandpaper are necessary; fine grain and medium grain sandpapers. They will be helpful in removing the limescale from the toilet bowl.
- On the rim and toilet bowl, use the medium-grain sandpaper to gently rub the surfaces. While doing this, ensure that you wear protective gloves.
- Avoid rubbing roughly and quickly as this may inflict some scratch marks on the surface of your toilet bowl.
- Once you are done with using the medium grain sandpaper, you can move ahead to use the fine sandpaper as this will help remove the finest limescale particles.
- You can flush the flushing toilet, and then pour some toilet cleaner, which should be allowed to stand for some moment.
- After this, use a toilet brush to thoroughly scrub the surface and hence remove the limescale.
- In case the limescale seems to persist, you can use undiluted white vinegar. Allow it to settle for 2 hours and use the same toilet brush to clean it.
- Finally, flush the toilet.
How can you Prevent Limescale Build-Up in a Toilet Bowl?
Limescale build-up in any toilet bowl makes it appear unattractive. To prevent this scenario, you need to use toilet cleaners and clean the bowl regularly. Some of the known natural products for cleaning to avoid limescale include vinegar, lime, and baking soda. You won’t get stubborn limescale if you keep treating them at the earliest stage.
Where the Limescale is likely to form
Don’t be duped that only toilet bowls are susceptible to limescale build-up; the reality is that if you get supplied with hard water, chances are that most of your plumbing fixtures are faced with the issue of limescale build-up. The minerals contained in the hard water are responsible for the limescale formation.
To some extent, your plumbing fixtures such as bathroom sink faucets won’t get adversely affected but their outlook will be disgusting. The simple clean-up process that people do in their toilets will not remedy the situation unless you use some of the methods we’ve discussed in this discourse.
Why will the Limescale form in your Toilet Bowl?
At all times, you will realize that your toilet bowl has some amount of water. You must be aware that the water entails minerals, some of which are magnesium and calcium. For example, the build-up of calcium deposits results in orange, yellowish, and sometimes brown rings within the inside area of your toilet bowl.
Conclusion
In sum, limescale in your toilet bowl can be a very disgusting phenomenon. With the presence of this disgusting formation, you will feel ashamed if a visitor wants to use your toilet. Then, how can you get rid of the limescale in the toilet bowl? We have discussed several useful methods you can use and they will surely work for you.