Are you here to learn how to remove faucet handle without screws? You must have settled in the best post that offers a detailed procedure of how to remove faucet handle without screws.
There are a lot of reasons that can make you intend to remove a faucet handle. For example, you might be wishing to change a faucet cartridge. You can’t change a faucet cartridge before removing the handles.
Why would you want to change a faucet cartridge? Most people change faucet cartridge when they realize that the water pressure is greatly below par.
When water is flowing at a low rate, there is a likelihood that the cartridge is worn out. For that reason, you will pass through the process of removing the handle and consequently change the cartridge.
On the same note, you might be willing to check for leakages which might be due to the fact that the cartridge is malfunctioning. If this is the case, you need to understand how to remove faucet handle without screws.
Also, you might decide to clean the interior sections of your faucet or change the filter. Down here, I will make you learn how to remove faucet handle without screws.
Tools Required To Remove Faucet Handle Without Screws
- Allen wrench
- Flat-head screwdriver
- An old towel
- Pair of pliers
- Faucet handle puller
- Distilled white vinegar
If you don’t have any of these tools and would like to buy from Amazon, click the colored buttons.
Procedure: How To Remove Faucet Handle Without Screws
- In the first step, shut the water supply by turning off the main water line. You can do this underneath your sink if the valves are located in this region. If you can’t locate where the supply line valves are located, turn off the main meter.
- Hopefully, you are dealing with a faucet handle that has a cap. At the base of your faucet handle, there is a cap. You will need to use a flat-head screwdriver to pry it off.
- The cap might not be found at the base of the faucet but could be located on the side. Irrespective of its positioning, use a flat-head screwdriver to pry it off.
- Use the Allen wrench to remove the screw that was initially invisible to you. If it is a setscrew, you will need to have a correctly sized Allen wrench to remove it.
- Before you remove the screw, ensure that the drain is covered. You don’t want the screw to fall on the drain and get lost. Remember, you will need this screw to secure the faucet handle tightly.
- If you have successfully removed the screw, pull out the faucet handle. Since the faucet handle is always secured firmly, use a pair of pliers or a faucet handle puller to smoothly remove it.
- As you remove the handle, wrap its base with the use of an old towel to avoid inflicting scratches on its surface. Otherwise, you make it appear ugly and old. To retain the sleek appearance, ensure you avoid scratching the surface by wrapping with an old towel.
- Around the area, use distilled white vinegar to remove water mineral deposits that collect around this area. These water mineral deposits contribute to ineffective functioning of the entire faucet system.
- If you wanted to study how to remove faucet handle without screws with an intention of cleaning the handle or replacing the cartridge, you can now go ahead and do it.
- After replacing the cartridge or cleaning the handle, you will have to reverse the process and have everything reassembled.
In summary, removing a faucet handle without a screw can be an intimidating task for some people. If you have never encountered this experience, you will need to comprehend how to remove faucet handle without screws by making good use of this useful resource. Probably, you would like to replace a malfunctioning cartridge, clean the faucet handle, and change the filter. You will find this guide quite useful to you. If you find this material helpful, share it with your friends.