Are you finding it hard to comprehend a method that can effectively be applied to clean bathroom sink drain? Many people have come up with different theories on how to clean bathroom sink drain that ends up being impractical.
If you are here to learn how to clean bathroom sink drain, it is probable that your sink drain is already clogged and water takes time to flow.
But what is causing this blockage? You will understand that a lot of dirt in form of toothpaste, lotion products, oily substances, and make-ups are dumped down the bathroom sink drain. They end up cooling and solidifying around the area. In the long run, the solid substance will result in a buildup that will gradually block the water path in the piping system.
You will need to keep your bathroom drain deodorized, clear, and clean. You don’t need to keep finding how to clean bathroom sink drain when the problem arises. Always, keep your bathroom sink drain clean as I am going to discuss with you in this post. People keep using a mixture of white vinegar and baking soda which is sometimes ineffective.
Science tells us that this is a mixture of a base and acid and the resulting product is always salt and water. Then can we just learn how to clean bathroom sink drain? Let’s first list the requirements.
Requirements: How To Clean Bathroom Sink Drain
- A pair of pliers
- Empty bucket
- Wire coat hanger
- Pipe wrench
- Channels lock
- Drain snake
Procedure: How To Clean Bathroom Sink Drain
- From the top of the sink drain, remove the stopper. Some stoppers are not firmly held at their position and it is easy to plug them out. If the stopper is strongly held, try to twist back and forth till you successfully remove it.
- After removing the stopper, you will realize that crud and hair are stuck; you will need to remove them.
- Prepare hot water and pour plenty of it down the bathroom sink drain. The sink drain will get a bit clean; but is it cleared for any blockages. You can’t clean the sink drain and leave the blockages behind. They ought to be cleared.
- Using a pair of pliers, cut a piece of wire coat hanger and on one end, bend it to form a hook.
- Use the hook to fish the sink drain for any hair and other forms of dirt. After removing the entire gunk, pour plenty of boiling water down the bathroom sink drain.
- If the problem is still unresolved, you will need to remove the stopper from the underneath.
- Under the sink, place an empty bucket to collect the water spillages. Check the position of the lift rod and loosen the screw holding the rod by use of a pair of pliers.
- Disconnect the lift rod from the tailpiece and pry out the stopper. Using the hooked wire, thoroughly clean the tailpiece because it is now accessible and visible to you. Don’t try to flush the hair and gunk down the drain because it might cause blockage down the piping; instead, pull out all the gunk and hair using the hook.
- If you are yet to resolve the issue, you will need to work on the P-trap. You might have cleaned around the stopper but this did not help. If this is the case, just reach under the bathroom sink and disassemble the drain piping.
- Position an empty bucket under the P-trap and loosen the bolts bolding the P-trap. You should loosen the two bolts by use hands. In case this is hard for you, use a pipe wrench or channels lock.
- Pull out the P-trap from the tailpiece and allow any water from the sink and the P-trap area to fall in the empty bucket.
- Once you have done this, start fishing out the crud, gunk, and hair clog in the tailpiece, P-trap, and the pipe connecting to the bathroom wall.
- Sometimes, the clog might be farther down the sink drain. In this case, you will need a snake to clean the drain. Do you know how to clean bathroom sink drain using a snake? This is what you will do.
- If you don’t have a drain snake, you will need to buy one. Make sure you purchase the drum-type drain snake. Even a plumbing auger will have the work done.
- Loosen the snake cable and free it by thumb screwing. You will need to press the snake cable into the wall pipe until it hits the bend of the pipe or a clog.
- Apply some moderate pressure on the snake cable and rotate the snake’s drum in the clockwise direction. If the snake cable can move farther, this means you have broken down the clog or navigated the bend.
- Make sure you go further 20 feet by repeating this process and then remove out the snake cable. 20 feet is not the limit in this case; you can repeat the process until all the clog is broken down.
- By now, everything should be okay and the bathroom drain should be clean. You’ll need to re-install the P-trap and securely tighten it back in its position using slip nuts and a pair of pliers.
- Re-install the sink stopper, lift rod, and secure the rod with a bolt from the underneath.
- Turn on the bathroom faucet and check for leaks in the sink drain. If you notice any leaks, you will need to tighten the connections. If everything is okay, you are a pro; you know how to clean bathroom sink drain.
Conclusion
All in all, you need to learn how to clean bathroom sink drain. These drains get clogged and hence blocked by soap, hair, and gunk. Soap buildup and hair can lead to dirt and blockage in the long run. You need to know how to clean bathroom sink drain so that you can occasionally clean it hassle-free. Getting inside the bathroom drain and cleaning it is better than using some toxic chemicals that don’t work. In reality, this is the best method you can use to clean a bathroom sink drain today. If you like this post, share it with your friends.