If you are worried about the challenges that you will face in the course of undertaking the Glacier Bay faucet repairs, this should not worry you anymore. We have prepared you a comprehensive guideline that will see you through in overcoming any inherent challenges.
You need to understand that Glacier Bay faucet repairs may be conducted as a result of your faucet’s malfunctioning. Is your faucet dripping? How do you fix a dripping faucet? If your faucet is leaky, most probably, this could be an issue with the cartridge, washers, or O-rings. Inside your Glacier Bay faucet cartridge, the worn out parts could be the leading factors to the faults in the entire system.
When your Glacier Bay faucet is faulty, the water pressure and temperatures will be significantly affected. If you have the right tools, Glacier Bay faucet repairs will be quite easy. Which tools do you require?
Contents
Tools Required
- Allen wrench
- Wash Rag
- Flathead screwdriver
- Pliers
After ensuring that you have got all the tools assembled and ready to start the Glacier Bay faucet repairs, ensure you put the following considerations into practice.
Glacier Bay Faucet Repairs Rationale
Why should you hurry up and repair your Glacier Bay faucet? First, you need to understand the value of the water lost as a result of a dripping faucet. Also, understand the value of tap water conservation. If in every second you are losing one drop of water through dripping, this is equivalent to 2000 gallons of water lost annually. What if you are losing more than one drop per second? That will translate to a massive water loss in each year, which will be a cost burden to you.
If you factor out the cost of repairing or replacing your old faucet, this will be lower than paying for inflated water and electricity bills. Remember, you turn your electricity on to heat the water that ends up dripping. If your faucet is not too old, the best decision will be to repair it.
Styles – Key Considerations
Before you go ahead with the Glacier Bay faucet repairs, you need to know that faucets are designed differently. For example, you might be willing to repair your double-handle faucet in your shower, kitchen, or bathroom. In some cases, these double-handle faucets have seats and washers while in other cases, they might not have them.
You also need to consider the situation of having triple-handle faucets that are either for your shower or bathroom. The triple-handle will still have seats and washers. However, a single-handle faucet will have a cartridge even though they can still have seats and washers as well.
In essence, there is a wide variety of different types of Glacier Bay faucets that you can find in the market today. In fact, even the cartridges, washers, and seats could be slightly different for bathroom, kitchen, and shower faucets. Having known all these important aspects, we can now delve into the Glacier Bay faucet repairs.
Glacier Bay Faucet Repairs – Procedure
In the repair process, you will realize that even the diverse faucets can be repaired using related procedures. The most important thing is that you should keenly note how the faucet parts were assembled before disassembling them. Having that order in mind will make your work easier regardless of the nature of the faucet that you intend to repair. Here is my procedure:
- Locate the position of the valve supplying the water into your faucet and turn it off. It could be just beneath your kitchen or bathroom sink.
- Remove the cover on your handle screw, and consequently, use a flat head screwdriver to remove the screw.
- After you remove the screw holding the faucet handle, pull out the handle. After this, remove the locking nut depending on the nature of the faucet.
- Once this is done, you will need to remove the cartridge or the stem depending on the nature of the faucet.
- You can illuminate some light inside your faucet and review whether there are cuts, chips, or nicks.
- For faucets that do not have washers, just inspect the rubber seats for cuts, chips, and nicks.
- If you realize that the seats are damaged, they could be the cause of the entire problem and it is time that you replace them.
- If it is a single-handle faucet, you need to inspect the cartridge and replace it. Sometimes, you might have to replace the entire stem depending on the faucet type.
- In doing the replacement, you just need to follow the order in which you disassembled the faucet parts.
- Once every part is back to its typical position, it is time to turn on the main valve and test whether there are any leaks. If there are no leaks, the work is done. You have completed the Glacier Bay faucet repairs.
Conclusion
In conclusion, the process of the Glacier Bay faucet repairs is quite easy. As you have realized, you require plenty of background knowledge to be able to work out the problem and have a reassuring solution. Start the process by making sure that you have the right set of requirements and the entire work will be easy.